8 Simple Ways to Avoid Plumbing Nightmares!

8 Simple Ways to Avoid Plumbing Nightmares!

8 Simple Ways to Avoid Plumbing Nightmares!

5 Things To Look For When Hiring A Plumber

Ever come home from a long day at work, exhausted and ready to bed, only to discover a pool of brackish, foul-smelling water pouring through your ceiling? It happens to everyone. If this story seems similar, take solace in the fact that you are not the only one who has had a plumbing nightmare. In need of emergency home plumbing services, many people have contacted a 24-hour Emergency Plumbers.

If you have never had to return home because of an emergency, consider yourself fortunate. However, in order to keep your good fortune, you must keep your plumbing in good working order. By regularly inspecting your plumbing, you can identify issues before they become a major problem. The following are some practical maintenance suggestions that can assist you in avoiding catastrophes.

How Can You Prevent Plumbing Issues?

1. Get a Drain Screen

The first rule is to be cautious about what goes down the drain, which includes hair, razor clippings, lotion, dental floss, and other clogs. As with other homes, plumbers must take precautions to safeguard our drainage systems, according to Wolfer’s Home Services’ general manager in Portland, Oregon.

When it comes to my drains, I clean them on a regular basis to ensure that they don’t get clogged and need an expensive repair. Additionally, I put a drain guard at the bottom of my shower to keep hair out of the plumbing system and preventing clogs. A screen costs less than $10 and when it becomes unsanitary, it can simply be tapped into the garbage.

2. Check the Water Pressure

If the water pressure in your home is excessive, the pressure can cause damage to your pipes and plumbing. You may prevent leaks and cracks by regularly checking the water pressure.

Make sure the water pressure in your home is not more than 80psi by using a pressure gauge to check the pressure. If the water pressure is higher than 80 psi, you should engage a professional domestic plumbing company to install a water pressure regulator in your home. Once you’ve installed the regulator, set it so that the water pressure is between 55 and 75 psi.

3. Check the condition of your toilet

A regular toilet maintenance check might aid in the detection of leaks at an early stage. Begin by cleaning the tank at the rear of your toilet before moving on to the flapper and other parts of the toilet. The flapper, which is the rubber cover that releases water during flushing, might warp out of shape and result in leakage of water. 

An easy test for a defective flapper is to put a few drops of dark-colored food coloring into your toilet’s tank and leave it there overnight. If you notice some color in the toilet bowl the next morning, this indicates that the flapper is malfunctioning and must be repaired or replaced.

4. Anything other than toilet paper should not be flushed

Your toilet, like the drain, is not a waste disposal device. There is only one object that should be flushed, and that is toilet paper. Paper towels, cat litter, and sanitary goods should never be flushed. 

It is possible for even wet wipes, particularly ones that are labelled as flushable, to block the toilet system. As a result, these things do not disintegrate quickly and might become caught in your pipes, necessitating the need for pipe repair or replacement if the damage is severe.

5. Re-caulk the inside of your toilet

It is important to caulk around your toilet to keep mop water, tub water, or overflow water from getting behind the toilet and destroying your floors. Caulk, in addition to preventing the fouling of the region, aids in the security of your toilet to the floor.

6. Clogs should be avoided and cleared

If your bathroom sink drains slowly or if you detect bubbles, you are most likely experiencing a blockage in the drain. However, you should not hire a plumber right away. Pouring boiling water down the drains a week or so is the most effective technique to avoid build-up (including soap scum and other debris or chemicals that eventually end up down the drain). 

Drain cleaning chemicals should be avoided since they may be hazardous and cause more issues in the long run than they solve. Instead, use a plunger — yes, even in the sink — or a $5 flexible drain snake to unclog obstructions in your drains and pipes. It’s disgusting, but it’s also quite fulfilling!

7. Ensure that the tank is clean

It is possible for layers of scale, germs, mold, mildew, and metal stains to form in the tank if it is not cleaned on a regular and thorough basis. If the tank is clogged, it will spill contaminated water into the toilet bowl, making it difficult to clean and maintain the bowl in the future.

8. Preventative Maintenance should be scheduled

Residential plumbing services may be scheduled in advance to assist you avoid a disaster. You can request that your 24-hour plumber come out and inspect and ensure that everything is in proper functioning order.

You may avoid plumbing-related floods, unpleasant odors, and even electric shocks by following these simple steps. In the event that you are experiencing a plumbing nightmare, attempting to fix the problem yourself may make the situation worse. 

Allow a skilled, licensed, and properly insured 24-hour plumber to assist you in avoiding a calamity. Work with the most experienced bathroom and toilet plumbing professionals in your area.

The Bottom Line

So, here we are towards the end of this blog. Hope you like the 8 simple ways to avoid a disastrous plumbing nightmare. Also, in case of any complex plumbing situations, please consider calling a plumber rather than DIYing yourself. This will help save time and reduce the risk of making the situation even worse!

Author: admin

Leave a Reply

Your email address will not be published.

Powered By London business directory | Ekta Directory